高速压力机温度场的有限元仿真及实验研究  

Temperature field simulation and experiment research of high speed press

作　　者：王磊[1] 柯尊芒 贾方[1] 王兴松[1] 

机构地区：[1]东南大学机械工程学院,江苏南京211189 [2]江苏省徐州锻压机床厂集团有限公司,江苏徐州221116

出　　处：《锻压技术》2011年第4期80-84,共5页Forging & Stamping Technology

基　　金：江苏省科技成果转化项目(BA2008030)

摘　　要：通过确定高速压力机的运动动力参数,分析计算了高速压力机的热源分布和对流换热系数,并获得了压力机的热边界条件。以有限元方法为基础,建立高速压力机的三维分析模型,进行了温度场变化的分析研究。分析及实验结果表明,所建立的三维压力机温度有限元模型能正确的模拟运行过程中的压力机温度场分布,为压力机热误差分析设计提供了数值分析及实验研究依据。The thermal boundary conditions of the high speed press were determined by calculating the heat generate resources and coefficient of heat transfer based on obtaining kinetic and dynamic parameters of the press.The finite element method was used to develop the thermal model of the press,and the changes of temperature distribution were studied.The results of the calculation and experiment show that the thermal FEM model can simulate properly the temperature distribution of the press during its operation.It provides the numerical analysis and experimental research basis for the press thermal error analysis design and experiment research.

关 键 词：压力机 温度场 有限元 

分 类 号：TG305[金属学及工艺—金属压力加工]