高浓度丁醇浸泡及N^+束注入诱变双重作用筛选丁醇高产菌  

Screening of a high butanol-yielding strain by high concentration butanol steeping and N^+ beam implantation

作　　者：谭秀花[1] 余晓斌[1] 常江波[1] 

机构地区：[1]江南大学生物工程学院工业生物技术教育部重点实验室,江苏无锡214122

出　　处：《工业微生物》2011年第4期16-20,共5页Industrial Microbiology

基　　金：教育部长江学者和创新团队发展计划资助项目(IRT0532);江苏高校优势学科建设工程资助项目

摘　　要：通过高浓度丁醇浸泡处理丙酮丁醇梭菌(Clostridium acetobutylicum)CL-2,筛选得到一株丁醇耐受能力提高并溶剂产量增加的菌株BR30-2,丁醇产量达11.77g/L,比CL-2提高了16.65%。以BR30-2作为出发菌株,进行N^+束注入诱变,筛选得到高产菌株BH-9,丁醇产量达14.51g/L,总溶剂为23.14g/L。在BH-9发酵过程中添加0.1%丁酸钠,丁醇产量达到16.59g/L,丁醇比例提高至67.38%。A higher butanol tolerance and butanol-yielding strain BR30-2 was screened from Clostridium acetobutylicum CL-2 after treated with high concentration butanol steeping and its output of butanol reached 11.77 g/L, increased by 16.65% than that of CL-2. Using BR30-2 as the starting strain for further mutation of N＋ beam implantation, a high butanol-yielding strain BH-9 was obtained, its butanol yield was as high as 14.51 g/L and the solvent yield was 23.14 g/L. After adding 0.1% sodium butyrate into the media during the fermentation by mutant BH-9, the output of butanol reached 16.59 g/L and the butanol ratio was up to 67.38 %.

关 键 词：高浓度丁醇浸泡 N+束注入 丁醇 

分 类 号：TQ923[轻工技术与工程—发酵工程]