检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:罗捷[1,2] 孙友梅[1] 侯明东[1] 段敬来[1] 常海龙[1] 刘杰[1]
机构地区:[1]中国科学院近代物理研究所,甘肃兰州730000 [2]中国科学院研究生院,北京100049
出 处:《原子核物理评论》2011年第3期326-331,共6页Nuclear Physics Review
基 金:国家自然科学基金资助项目(10775162)~~
摘 要:二氧化钛(Titatium Dioxide,简称TiO2)晶体在中能重离子辐照时表面会出现肿胀效应,肿胀高度与入射离子的电子能损和辐照注量有关。辐照后的TiO2在一定条件下能够被氢氟酸溶液化学蚀刻,化学蚀刻的电子能损阈值为8.2 keV/nm,未辐照TiO2呈现几乎零蚀刻率。要达到饱和蚀刻深度,辐照离子的注量必须大于或等于1×1013ions/cm2。采用离子辐照的潜径迹理论分析研究了辐照损伤及对化学蚀刻的影响,快重离子辐照结合化学蚀刻是制备TiO2微结构的有效方法。There appears volume swelling on the surface of the irradiated rutile TiO2 crystal and the volume swelling is affected by the ion fluence and the electronic stopping power.To induce adequate irradiation damage for the chemical etching,the irradiation parameters must fulfill some requirement.There is minimum electronic stopping power for the chemical etching of the irradiated region in TiO2 crystal,which is about 8.2 keV/nm.If the ion fluence is below 1×1013 ions/cm2,the saturated etching depth of the irradiated region in TiO2 crystal cannot be reached.The irradiation damage based on latent track formation frame and the theoretical linkage to the etching technique is investigated.It is hopeful to fabricate micro-and nano-scale structurce in rutile TiO2 crystal by using the ion irradiation and chemical etching technique.
分 类 号:O571.33[理学—粒子物理与原子核物理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:52.15.207.126