基于正交法的旋涡泵结构优化  

Structural Optimization of Vortex Pumps Based on Orthogonal Law

作　　者：赵万勇[1] 马鹏飞[1] 张凡[1] 白双宝[1] 

机构地区：[1]兰州理工大学能源与动力工程学院,甘肃兰州730050

出　　处：《甘肃科学学报》2011年第3期76-80,共5页Journal of Gansu Sciences

基　　金：甘肃省教育厅研究生导师科研项目(0503-04)

摘　　要：以25W-25型旋涡泵为研究对象,对其5种结构参数重新进行配置,同时引入正交试验法,设计一个5因素4水平的正交方案,得到16种不同的结构配置方案,并将其划分为4组.建立对应各配置方案的旋涡泵三维模型,以非结构化网格划分流动区域,运用雷诺时均方程和RNGk-ε湍流模型结合SIMPLEC算法对各模型进行数值模拟.通过分析从各组中选出最优模型,将选出的4种模型与原型泵做最终对比,得到了2种比原模型更为优秀的结构方案.A new disposition of five structural parameters of 25W-25 vortex pump was carried out,and the orthogonal testing method was introduced to design the orthogonal scheme with five factors and four levels. Then, 16 different structural disposition schemes were obtained from the orthogonal scheme and divid- ed into 4 groups. After that,the three-dimensional models of each disposition scheme were established and each of them divided by non-structural grid. Then the models were simulated by using the Reynold time-average equation, RNG k-ε turbulence mode and the SIMPLEC algorithm. With the simulated result,the optimal model of each group was selected,and finally, two better structural schemes were obtained after the comparison with the original pump model.

关 键 词：旋涡泵 正交法 结构优化 内部流场 数值模拟 

分 类 号：TH314[机械工程—机械制造及自动化]