三种酸蚀剂联合偶联剂对Cerinate瓷与树脂粘结强度的影响  

The effect of three porcelain etching agents combine with silane coupling agent on the bond strength between cerinate porcelain and composite resin

作　　者：张震芳[1] 陈吉华[2] 施生根[1] 石馨[1] 卢怡[1] 张建波[1] 

机构地区：[1]解放军306医院全军口腔疾病诊治中心,北京100101 [2]第四军医大学口腔医学院修复科,陕西西安710032

出　　处：《临床口腔医学杂志》2011年第9期538-540,共3页Journal of Clinical Stomatology

摘　　要：目的:评价三种陶瓷酸蚀剂联合偶联剂对Cerinate瓷与树脂粘结强度的影响。方法:将252个Cerinate瓷试件分为3组,每组84个试件,分别用自制A配方(含2.5%氢氟酸)﹑B配方(含6%氢氟酸)、C配方(含10%氢氟酸)陶瓷酸蚀剂处理0 s﹑30 s﹑60 s﹑90 s、120 s、150 s、180 s后,一半使用偶联剂,另一半不使用偶联剂,与树脂粘结后测试其粘结强度。结果:无偶联剂组酸蚀30 s后C配方的剪切强度为27.46 MPa,偶联剂组在酸蚀30 s后C配方剪切强度可达31.08 MPa,酸蚀时间对粘结强度无明显影响。结论:C配方配合偶联剂较短酸蚀时间内可获得较理想的粘结强度。Objective：To evaluate the effects of three acid etching agents and silane coupling agent on the bond strength Cerinate porcelain and composite resin.Method：Porcelain specimens were divided into three groups and then etched the porcelain surfaces with type A（2.5 % hydrofluoric）,type B（6 % hydrofluoric） and type C（10 % hydrofluoric） acid etching agents for 0 s,30 s,60 s,90 s,120 s,150 s,180 s,Each group was divided into two sub-groups：one was treated with silane coupling agent and another was not untreated.The shear bond strengths were measured after composite resin was bonded to the porcelain.Result：Type C ceramic etching agent combined with silane coupling agent treatment can generate 31.08 MPa shear bond strength after etched 30 s.Conclusion：Type C acid etching agent cooperates with silane coupling agent can give the higher shear bond strength in shorter etching time,and have potential clinical value.

关 键 词：酸蚀 陶瓷酸蚀剂 偶联剂 粘结 剪切强度 

分 类 号：R783.1[医药卫生—口腔医学]