抛光机磨头磨块座的小挠度弯曲实验及分析  

Experiments and Analysis of Bending Deflection for Grinding Block Holder of Polishing Machine

作　　者：邵俊鹏[1] 徐斌[1] 迟明善[1] 

机构地区：[1]哈尔滨理工大学机械动力工程学院,哈尔滨150080

出　　处：《机械科学与技术》2011年第11期1835-1839,共5页Mechanical Science and Technology for Aerospace Engineering

基　　金：高等学校博士学科点专项科研基金项目(20050214001)资助

摘　　要：为了研究摆动式抛光机磨块座的小挠度弯曲问题,将磨块座简化为悬臂薄板模型。通过薄板弯曲微分方程,利用边界条件推导出结点有限差分方程。由实例计算和实验分析得出磨块座弯曲挠度由边缘处最大到中心处逐渐减小,磨块座弯曲挠度造成磨块边缘相对于磨块中心的位置磨损量差值不超过0.5 mm。In order to investigate the bending deflection for grinding block holder of swing-style polishing machine.The grinding block holder is simplified as the cantilever beam.The bending differential equation of thin plate is established.According to the boundary condition,finite difference equations of node are obtained.From the case calculation and experimental results,it is concluded that the bending deflection of grinding block holder reduces from the periphery to the core and the difference in wear loss of grinding block from the periphery to the core is less than 0.5 mm.

关 键 词：抛光机 磨头 磨块座 弯曲挠度 

分 类 号：TH17[机械工程—机械制造及自动化]