物理气相沉积对化学钢化玻璃弯曲强度的影响  

Influence of Physical Vapor Deposition on Cross Breaking Strength of Chemically Strengthened Glass

作　　者：张文杰[1] 马磊[2] 王兆祥 

机构地区：[1]玉林师范学院物理科学与技术工程学院,广西玉林537000 [2]华南理工大学材料科学与工程学院,广东广州510640 [3]深圳市深新隆实业有限公司,广东深圳518055

出　　处：《玉林师范学院学报》2011年第5期45-48,共4页Journal of Yulin Normal University

基　　金：广西教育厅科研项目(200911LX369)

摘　　要：采用真空烘烤热蒸发沉积、烘烤离子束辅助沉积和离子束辅助沉积三种方法在化学钢化玻璃上分别镀制硫化锌薄膜.用万能材料试验机和扫描电镜(scanning electron microscopy)表征样品的物理强度和成分结构.SEM分析结果表明:真空烘烤热蒸发沉积ZnS薄膜表面K+含量高,而离子束辅助沉积ZnS薄膜表面K+含量低.这是导致化学钢化玻璃物理强度下降的主要原因.The ZnS thin films on chemically strengthened glass were prepared by baking,vacuum vapordeposited coating and baking,ion beam assisted deposition and ion beam assisted deposition.The universal testing machine and scanning electron microscope（SEM） were carried out to characterize their physical strength and microstructures.The results of the SEM analysis show the percents of K＋ quality in the ZnS films is high.But the percent of K＋ quality in the ZnS films is low.This is the main reason of the degradation of chemically strengthened glass physical strength.

关 键 词：离子束辅助沉积 钢化玻璃 弯曲强度 

分 类 号：TQ171[化学工程—玻璃工业]