基于同步信号的多路延时IGBT驱动电路设计  

Design of multi-channel time-delayed IGBT driving circuit based on synchronous signals

作　　者：石经纬[1] 巩春志[1] 张可心[1] 田修波[1] 杨士勤[1] 

机构地区：[1]哈尔滨工业大学现代焊接生产技术国家重点实验室,黑龙江哈尔滨150001

出　　处：《电力自动化设备》2012年第1期123-126,共4页Electric Power Automation Equipment

基　　金：国家自然科学基金资助项目(50773015;10975041)~~

摘　　要：基于同步信号设计了一种可实现相互之间高压隔离的IGBT多路延时驱动电路系统,并应用到Marx电路中,实现了可柔性调节的阶梯型脉冲高压输出。试验结果表明,延时驱动电路可实现最大30μs的延时,且具有IGBT驱动电压欠压保护、自给反向栅压等功能,同时场效应管的存在抑制了栅射极电压振荡。驱动信号高压隔离变压器为单原边多副边结构,简单紧凑,通过副边数目的增减,可驱动不同级数的Marx电路,具有扩展性好的优点。过流保护电路反应速度快,IGBT关断可靠,可在2μs之内抑制短路电流继续上升。该驱动电路应用于10级的Marx电路中,实现了峰值电压10 kV,脉冲宽度30μs,最大电压阶数10阶的脉冲高压输出。A multi-channel time-delayed GBT（Insulated Gate Bipolar Transistor） driving circuit system is designed based on synchronous signals,which is applied to Marx circuit for outputting soft-adjustable discrete-step high-voltage pulse. The high-voltage channels are isolated from each other. Experimental results show that,the driving circuit has the maximum time delay of 30 Ixs. It has under-voltage protection, and provides minus-voltage pulses to gate and applies MOSFET to inhibit the gate-emitter voltage oscillation. The high-voltage isolation transformer of driving signal has a compact structure of single primary winding and multiple secondary windings to drive multi-stage Marx circuit with good expandability. Its over-current protection has fast response,which turns IGBT off reliably to suppress the short-circuit current within 2 μs. It is applied in the ten-stage Marx circuit to output 10 kV-30 μs pulse with up to ten steps.

关 键 词：延时 驱动电路 MARX电路 阶梯型脉冲 欠压保护 IGBT 场效应管 

分 类 号：TM46[电气工程—电器] TN710[电子电信—电路与系统]