发电用微型燃气轮机三相四桥臂逆变器解耦控制  

Decoupling Control of Three-Phase Four-Leg Inverter in Micro-Turbine Power Generation

作　　者：闫士杰[1] 王旭[1] 陈宏志[1] 

机构地区：[1]东北大学信息科学与工程学院,沈阳110004

出　　处：《电工技术学报》2012年第1期69-73,共5页Transactions of China Electrotechnical Society

基　　金：国家863科技攻关项目(2002AA503020;2006AA04Z183)

摘　　要：针对发电用微型燃气轮机系统中的三相四桥臂逆变器,提出了基于内阻变换的解耦控制策略。主要将逆变器和其输出滤波器作为一体化逆变电源,进行一体化建模和一体化控制。经过等效变换,将零线桥阻抗值变换为零,将其他各相的阻抗等效地降为较低的阻抗值,将其解耦成三个相互独立的单相逆变器。控制方法上,采用幅相多环控制,特别是对不平衡和非线性负载具有良好的控制能力。仿真和实验结果验证了该控制方法的正确性和有效性。In the microturbine power system,decoupling control strategy of three-phase four-leg inverter is proposed based on the internal impedance transformation.The inverter and its output filter are regarded as an integrated inverter power supply to modeling and control as a whole unit.After equivalent transformation,the impedance of zero-leg is transformed into zero and the others are reduced to a lower equivalent impedance value.The three-phase four-leg inverter is decoupled into three independent single-phase inverters.In this scheme,an amplitude-phase multi-loop system is applied.Advantages of the four-leg inverter structure are exerted particularly for unbalanced and non-linear load.The simulation and experiment results show that the control method is correct and effective.

关 键 词：三相四桥臂逆变器 幅相控制 内阻变换 解耦控制 

分 类 号：TM464[电气工程—电器]