检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:尤虎[1] 郭方敏[1] 朱晟伟[1] 越方禹[1] 范梁[1] 茅惠兵[1]
机构地区:[1]华东师范大学信息科学技术学院极化材料与器件教育部重点实验室,上海200241
出 处:《激光与红外》2012年第1期59-62,共4页Laser & Infrared
基 金:国家科技部重大科研项目(No.2006CB932802;No.2011CB932903);上海市配套项目(No.078014194)资助
摘 要:GaAs/InGaAs量子点光电探测器,在633 nm激光辐射3.5 nW条件下,器件偏压-1.4 V时,测得响应电流8.9×10-9A,电流响应率达到2.54 A/W,量子注入效率超过90%。基于GaAs/InGaAs量子点光电探测器的高量子注入效率、高灵敏度等特点,采用具有稳定的电压偏置,高注入效率和低噪声特点的CTIA(电容互阻跨导放大器)作为列放大器读出结构,输出部分采用相关双采样(CDS)结构去除系统和背景噪声。实验结果表明,在3.5 nW的微光辐射下,器件偏压为-2.5 V时,50μm×50μm像素探测器与读出电路互联后有7.14×107V/W的电压响应率。When-1.4 V bias and 3.5 nW 633 nm laser radiation are applied,the GaAs / InGaAs quantum dot-in-well photodetector can get 8.9×10-9 A response current and the current responsivity is 2.54 A/W.Its quantum efficiency is above 90%.Based on the photoelectric characteristics of the InGaAs/GaAs Quantum dot Photodetector,a stable bias,high inject efficiency and low noise CTIA readout circuit has been designed,which applies correlated double sampling(CDS) to the output of the CTIA circuit.Experiment results show that the readout circuit works well and the voltage responsivity can reach 7.14×107 V/W when the 50 μm×50 μm pixel device is biased with-2.5 V and radiated with 3.5 nW laser power.
关 键 词:量子点 量子效率 响应率 微光探测 CTIA读出
分 类 号:TN215[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.87