涤纶织物表面化学镀铜工艺研究  

Study on the Technology of Electroless Cu Plating on Polyester Fabric

作　　者：张欢[1] 王浩[1] 贾玉容[1] 张杰[1] 戴亚堂[1] 

机构地区：[1]西南科技大学材料科学与工程学院,绵阳621010

出　　处：《表面技术》2012年第2期67-69,112,共4页Surface Technology

基　　金：国家高技术研究发展计划(863计划)资助项目(2008AAxxx0810);西南科技大学博士基金资助项目(08zx0101)

摘　　要：采用化学镀法在涤纶织物表面制备铜镀层,研究了粗化温度、镀液温度、主盐浓度和施镀时间等对沉积速率和镀层形貌的影响,获得了优化的镀液配方和最佳工艺条件,并测试了采用优化工艺所得镀层的成分。结果表明:采用优化的工艺条件,织物表面的铜镀层致密,光滑平整,厚度均匀,包裹了整根纤维,杂质含量极少。Copper coating was prepared by electroless on polyester fabric.The influences of coarsening temperature,plating temperature,main salt and plating time on the depositing rate and morphologies were discussed.The optimum plating bath and the best processing conditions were obtained,and the composition of the coatings prepared under the optimized process was studied by x-ray diffraction.Results indicate that the Cu coatings are dense,smooth,uniform thickness and the whole fibers is wrapped,and the impurities of the coatings is very few.

关 键 词：涤纶织物 化学镀铜 镀液配方 工艺条件 

分 类 号：TQ153.1[化学工程—电化学工业]