基于PLC及伺服控制器的自动卷绕控制设计  

Design of Auto-rolling System Based on PLC and Servo Controller

作　　者：张爱丽[1] 祝天龙[1] 蔡武珍 

机构地区：[1]河南师范大学计算机与信息技术学院,河南新乡453007 [2]新乡天禄公司,河南新乡453007

出　　处：《郑州大学学报（工学版）》2012年第2期99-102,共4页Journal of Zhengzhou University（Engineering Science）

基　　金：河南省科技攻关项目(082102210109);河南省基础与前沿技术研究计划项目(102300410011)

摘　　要：基于伺服控制器、可编程控制器(PLC)及触摸屏技术,完成了自动卷绕生产过程的硬件设计规划、I/O定义、电气原理图及相关程序等.采用PLC完成送料、夹紧、切断、拉断等工序的自动循环.由PLC程序判断输入设备的状态,给出正确的控制指令,然后通过定位模块输出定位脉冲给伺服驱动器,控制电机运行.采用触摸屏完成生产过程的画面监控、参数设置及指令下达等任务.最终测试结果表明,系统运行可靠,且提高了工作效率.Based on servo controller,PLC and touching screen,this paper completes handware plan,I/O assignment,schematic diagram and program on process of auto-rolling controlling.Material feeding,clamping,cutting,snapping were completed with PLC.According to the status of input device,PLC sends out correct instruments,and then transmits locating pulse to servo controller via position modules,and makes motors rotate.Supervisor of real controlling process,parameter configuration and command transmitting are finished on touching screen.The testing results show that the whole system works well and the working efficiency is improved.

关 键 词：可编程控制器 伺服控制器 触摸屏 自动卷绕 

分 类 号：TM571.2[电气工程—电器]