考虑固溶及时效处理的镁合金铸件微观组织模拟及力学性能预测  

MICROSTRUCTURE SIMULATION AND MECHANICAL PROPERTY PREDICTION OF MAGNESIUM ALLOY CASTING CONSIDERING SOLID SOLUTION AND AGING PROCESS

作　　者：韩国民[1] 韩志强[1] 霍亮[1] 段军鹏 朱训明 柳百成[1,3] 

机构地区：[1]清华大学机械工程系,先进成形制造教育部重点实验室,北京100084 [2]威海万丰镁业科技发展有限公司,威海264209 [3]清华大学汽车工程系,汽车安全与节能国家重点实验室,北京100084

出　　处：《金属学报》2012年第3期363-370,共8页Acta Metallurgica Sinica

基　　金：国家自然科学基金项目51175291;清华大学自主科研计划;国家科技部国际科技合作计划课题2010DFA72760资助~~

摘　　要：基于改进元胞自动机(CA)模型,综合考虑铸造、固溶处理和时效处理过程中的微观组织转变,建立了镁合金铸件微观组织演化模型;在分析Mg-Al系镁合金第二相析出过程和强化机理的基础上,建立了镁合金铸件力学性能模型;针对镁合金汽车轮毂,采用建立的模型,模拟预测了铸件关键部位的微观组织演化和力学性能.结果表明,铸态和固溶处理条件下屈服强度的预测值与实际测量平均值吻合较好,而时效处理状态下的预测值与实测平均值有一定差别。A microstructure model was established for simulating the microstructure evolution during casting,solid solution and aging process of magnesium alloy casting based on the modified cellular automaton（CA） model.A mechanical property model taking into account the second phase precipitation and strengthening mechanism was developed for Mg-Al alloy.The established models were applied to simulate the microstructure evolution and predict the mechanical properties of a magnesium alloy automobile wheel casting.The results show that the predicted tensile strength is in good agreement with the average measurements,and the predicted yield strength is in good agreement with the average measurements under as-cast and solid solution state,while there are some discrepancies between the predicted and measured yield strengths under aging state.

关 键 词：镁合金 微观组织演化模型 力学性能模型 汽车轮毂 

分 类 号：TG146.21[一般工业技术—材料科学与工程]