基于有限状态机的电梯控制系统故障诊断方法  

Fault diagnostic method of elevator control system based on finite state machine

作　　者：包健[1] 魏丽娜[1] 赵建勇[1] 

机构地区：[1]杭州电子科技大学计算机学院,杭州310018

出　　处：《计算机应用》2012年第6期1692-1695,共4页journal of Computer Applications

基　　金：浙江省公益技术应用研究项目(2010C31G2040104)

摘　　要：针对电梯控制系统软故障样本获取困难及产生时间短暂的问题,提出一种基于状态机的故障诊断方法。利用电梯控制开关量和电梯运行模拟量作为状态机的状态特征,在电梯正常运行过程中收集各状态并记录状态转换,以此建立电梯控制系统的规范模型;改进基于有限状态机的被动测试错误检测算法,对待诊断的电梯控制系统进行故障检测/诊断;并不断地确认新的故障情况,完善规范模型。实验结果表明,该方法可以及时检测出未知情况,也可以有效地诊断已知故障,对电梯控制系统瞬间出现的软故障有很好的监督作用。The soft fault samples of the elevator control system are difficult to obtain and their generation time is always short. To solve the problem, this paper proposed a fault diagnostic method based on Finite State Machine （ FSM）. The switch variables and analog variables of elevator were taken as the state characteristics of FSM. The diagnostic system collected and recorded various states and transitions between states during the normal operation of elevator. Based on this operation, a specification model of elevator control system could be built up. To detect and diagnose faults of elevator control system, the passive test error detection algorithm based on FSM was adopted and optimized. The last step was to verify new faults and complete the specification model. The experimental results show this method can not only detect unknown situations timely, but also diagnose known faults effectively. The method plays a good supervisory role to the transient soft faults of elevator control system.

关 键 词：电梯控制系统 有限状态机 软故障 错误检测 故障诊断 

分 类 号：TP181[自动化与计算机技术—控制理论与控制工程]