基于均匀照明的LED反射器的设计  

Reflector design for LED based on uniform illumination

作　　者：许耀云[1] 井西利[1] 丁金刚[2] 马毅恒[1] 靳李丽[1] 邢小宁[1] 

机构地区：[1]燕山大学理学院,河北秦皇岛066004 [2]北京工商大学材料与机械工程学院,北京100048

出　　处：《光学技术》2012年第3期345-349,共5页Optical Technique

摘　　要：为了创造良好的视觉环境,并提高光能利用率,设计了一种基于均匀照明的LED反射器。之所以选用球面环形阵列LED光源,第一是为扩大照明范围,其次是为了避免面光源垂直照射产生光强过强而导致的眩晕。设计的反射器是运用划分网格的方法获得自由曲面面型,运用机械建模软件拟合曲面的实体模型,进行了照明仿真模拟及分析。结果表明,与传统的反光器相比,自由曲面的反射器能较大程度地利用光源发出的能量,而且均匀性也有很大的提高。In order to allow people to have a good visual environment, also to make better use of light, it is important that to design a kind of reflectors for LED based on uniform illumination. Light sources is put in spherical annular array to avoid the vertigo, owing to excessive light intensity, that is produced if light source vertical illumination; but also to expand the scope of the lighting. This kind of reflectors is made up of free-form points that are obtained by distribution u- sing grid method. Then the solid model is set up using mechanical modeling software and another then use the optical simulation software to carry out the illumination. The results illustrate that the free-form reflector can make a better use of light energy than the old one. Uniformity is greatly improved.

关 键 词：自由曲面 反射器 网格法 均匀矩形照明 

分 类 号：TM923[电气工程—电力电子与电力传动]