检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:沈仁富[1] 陈宇鸿[1] 王益萍[1] 陈海红[1] 陈金斌[1]
机构地区:[1]浙江省温岭市疾病预防控制中心,浙江温岭317500
出 处:《中国卫生检验杂志》2012年第6期1291-1292,1295,共3页Chinese Journal of Health Laboratory Technology
摘 要:目的:建立用火焰原子吸收法测定水产品中钡的方法。方法:样品经湿法消解后,消解液中的钡用硫酸沉淀过滤,硫酸钡在氨碱性EDTA溶液中煮沸溶解,在波长553.6 nm处用火焰原子吸收法测定水产品中钡的含量。结果:采用本法,钡浓度在0 mg/L~200 mg/L范围内与吸光度呈良好的线性关系(r=0.99923),方法的检出限为5.2 mg/kg。测定样品的相对标准偏差在2.0%~3.5%之间,回收率在92.2%~101.4%之间。结论:该方法操作简便,线性范围宽,干扰因素小,有较好的精密度和准确度,可用于水产品中钡的定量检测。Objective:To set up a method for determination of barium in aquatic products by flame atomic absorption spectrometry.Methods:Barium in samples was precipitated with sulfuric acid after wet digestion,then barium sulfate was dissolved in boiled alkaline ammonia EDTA solution.The level of barium in aquatic products was detected at wavelength of 553.6 nm by flame atomic absorption spectrometry.Results:With this method,the concentration of barium showed good linearity with absorbance in the range of 0 mg/ml~200 mg/ml(r = 0.99923).The limit of detection was 5.2 mg/kg,RSD was between 2.0%~3.5%,and the recovery was 92.2%~101.4%.Conclusion:This method can be used for quantitative detection of barium in aquatic products with the advantages of easy operation,wide linearity range,little interference,good precision and accuracy.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15