检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张福星[1] 郑源[2] 汪清[1] 李杰[1] 徐素红[1] 辛华荣 吴忠
机构地区:[1]河海大学水利水电学院,南京210098 [2]河海大学能源与电气学院,南京211100 [3]江苏省走马塘张家港枢纽工程建设处,张家港215600
出 处:《机械设计与制造》2012年第10期222-224,共3页Machinery Design & Manufacture
基 金:海洋可再生能源专项资金项目(GHME2011CX02)
摘 要:利用ANSYS Workbench软件建立了深沟球轴承的三维非线性接触模型,对模型的边界条件进行合理的设置后,基于有限元的方法,在Static Structural(ANSYS)中对深沟球轴承的接触应力和变形进行了仿真计算,得到了轴承滚动体和内、外圈不同部位接触应力和变形的分布。计算结果与Hertz理论解进行了对比,两者具有良好的一致性,说明了用ANSYS Workbench分析滚动轴承接触问题是可行的,符合轴承在载荷作用下受力和变形的实际情况;有限元仿真计算的结果为滚动轴承的设计、优化和失效分析提供了参考依据,具有一定的工程实用价值。The 3D nonlinear contact model of a deep groove ball bearing was established in ANSYS Workbench software.With the reasonable setting of the boundary conditions ,the contact stress and defor- mation were calculated in Static Structural (ANSYS)by using the finite element method,and the contact stress and deformation of the inner ring, the outer ring and the rolling elements were obtained.Furthermore the computational values are consistent with the Hertz values.The results show that solving the bearing con- tact problem with ANSYS Workbench software is feasible and it coincides with the stress and deformation of the actual situation.The FEM results provide reference for the design,optimization and failure analysis of rolling bearings and have practical engineering value.
分 类 号:TH16[机械工程—机械制造及自动化] TH133.33
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28