苯丙微乳液的制备及其在表面施胶剂中的应用  

Preparation of Styrene-acrylic Emulsion and Its Application in Paper Surface Sizing

作　　者：刘文 陈继伟 

机构地区：[1]广东省造纸研究所,广东广州510640

出　　处：《造纸科学与技术》2012年第2期37-40,70,共5页Paper Science & Technology

基　　金：广东省产学研省部合作专项资金项目(项目编号:2011B090400300)

摘　　要：本文利用半连续种子乳液聚合法合成苯丙乳液,并将其制备成表面施胶剂应用于纸张施胶中。实验发现:反应温度为85℃,单体总量所占的比例分别为:w(St)=36.7%,w(BA)=41.8%,w(MMA)=18%,w(AA)=2%,w(NaHCO3)=0.4%,w(APS)=0.5%,w(N-MA)=0.3%时,苯丙乳液稳定性和粒径大小最佳。所得的乳液固含量为32.3%,粒径为107nm,凝胶量为0.08%,吸水率为3.7%,具有良好的粒子稳定性和机械稳定性。与淀粉、PVA、市售两种苯丙乳液制得的表面施胶剂相比,自制的苯丙微乳液可赋予纸张更为良好的表面性能,施胶后纸张抗张强度可达61N·m/g,表面强度可达3.52m/s,施胶度可达215s。In this paper,styrene-acrylic emulsion was synthesized by method of the semi-continuous seeded emulsion and applied to the papers surface sizing.The influence factors of styrene-acrylic emulsion were discussed,the temperature was 85℃ in polymerization,the optimun molar ratio was obtained： w（ST）=36.7%,w（BA）=41.8%,w（MMA）=18%,w（AA）=2%,w（NaHCO3）=0.4%,w（APS）=0.5%,w（N-MA）=0.3%.The styrene-acrylic emulsion has good particles stability and mechanical stability：solids content is 32.3%,particle size is 107nm,gel is 0.08%,water absorption is 6.2%.As compared with PVA,ordinary styrene-acrylic emulsion,commercially available styrene-acrylic emulsion on the paper surface sizing,the self-made styrene-acrylic micro-emulsion can give a more favorable properties of papers surface,meanwhile tensile strength of the paper sized is up to 61N·m/g,surface strength is up to 3.52m/s,sizing degree is up to 215s.

关 键 词：苯丙乳液 乳液稳定性 表面施胶剂 施胶度 

分 类 号：TS727.2[轻工技术与工程—制浆造纸工程]