基于实验测试分析的刀版布置优化研究  

Study on Knife Layout Optimization Based on Experiments

作　　者：杨海奎[1] 王仪明[1] 施向东[1] 张磊[1] 

机构地区：[1]北京印刷学院,北京102600

出　　处：《包装工程》2012年第21期78-81,85,共5页Packaging Engineering

基　　金：国家科技支撑计划课题资助(2012BAF13B05);北京印刷学院校级科研团队专项资助

摘　　要：通过对双肘杆机构的平压平模切机在实际工况下的振动分析,利用丹麦B&K振动测试系统及FBD压力测试系统,得到了模切刀痕线及橡胶条的压力大小,并比较得出了平衡刀的数量是影响模切压力均匀性的重要因素。根据研究结论,可确定模切版的刀版布置优化方案,进而保证模切压力的均匀性,提高模切精度。Vibration analysis was carried out on die-cutting machine elbows bar mechanism in the actual conditions. Denmark B ＆ K vibration test system and Japan FBD pressure test system were used to test die-cutting knife marks line and the pressure of the rubber strip. It was concluded that the number of balance knife is an important factor influen- cing the uniformity of cutting pressure. The purpose was to provide reference for determining knife layout to ensure the uniformity of die-cutting pressure and improve precision of die-cutting.

关 键 词：模切压力 平衡刀 振动测试 

分 类 号：TS803[轻工技术与工程]