检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:赵瑞东[1,2] 罗二仓[1] 吴张华[1] 戴巍[1]
机构地区:[1]中国科学院低温工程学重点实验室,北京100190 [2]中国科学院研究生院,北京100049
出 处:《工程热物理学报》2012年第12期2030-2033,共4页Journal of Engineering Thermophysics
基 金:国家重点基础研究发展计划973资助项目(No.2010CB227303)
摘 要:本文提出并搭建了一种采用直线电机驱动的回热器热声转换实验台,通过调节负载阻抗改变回热器处声场条件,研究回热器在不同声场下热声转换特性。文中首先对实验系统进行了数值模拟,结果表明,回热器存在最优的工作声场,但由于有限水力半径因素,最优声场会偏离行波相位。计算中系统获得了最大1300 W净输出声功,热声效率达到35%。之后进行的实验实现了回热器处声场的调节,验证了回热器的声功放大作用,并获得了与数值计算相同的趋势。An experiment rig is proposed and built to study on the performance of regenerator driven by linear alternator. With the change of load impedance, different acoustic field is derived and thermoacoustic conversion of the regenerator in different acoustic field can be investigated. Firstly, numerically work is done and the results show that an optimal acoustic field exists for the performance of regenerator and because of finite hydraulic radius, the optimal acoustic field will deviate the traveling-wave phasing. The maximum net output acoustic power of 1300 W is obtained with a thermoacoustic emciency of 35%. Then preliminary experiments are done which realizes the regulation of acoustic field and verifies the acoustic power amplification in the regenerator. The experimental results have the same trend with the calculation.
分 类 号:TK123[动力工程及工程热物理—工程热物理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.52