冲击片雷管集成制造方法研究  

Research on Fabrication Method of Integrated Slapper Detonator

作　　者：曾庆轩[1] 郑志猛[1] 李明愉[1] 吕军军[1] 

机构地区：[1]北京理工大学爆炸科学与技术重点实验室,北京100081

出　　处：《火工品》2012年第5期1-3,共3页Initiators & Pyrotechnics

基　　金：基金项目：国防预研项目（513051101）.

摘　　要：对采用微加工技术制造冲击片雷管的方法进行了研究，首先采用磁控溅射、光刻和湿法刻蚀在玻璃基片上制造桥箔，黏贴聚酰亚胺飞片，然后用光固化的环氧树脂制作加速膛。对该方法制作的冲击片雷管进行爆发试验，冲击片雷管均可靠作用。爆发试验得到的飞片平均速度与理论计算的平均速度具有很好的一致陛。The method of fabricating the slapper detonator with the systems technology was researched. Firstly, magnetron sputtering, lithography and wet etching were used to fabricate the bridge foil on the glass substrate, and polyimide flyer was stuck on it, then the barrel with the UV curable epoxy resin was produced. The exploding tests were carried out for the slapper detonators produced by the proposed method, the average flyer velocity of the explosion test and that of the theoretical calculation have very good consistency.

关 键 词：冲击片雷管 微加工技术 光固化环氧树脂 爆发 

分 类 号：TJ450.3[兵器科学与技术—火炮、自动武器与弹药工程]