Bending Strength Properties of Finger Jointed Off-Cut Yellow Meranti （Shorea spp.） Wood  

作　　者：Mohd Zulfahmi Sapari Jsmaludin Kasim Wan Mohd Nazri Wan Abdul Rahman Abdul Hamid Saleh 

机构地区：[1]Faculty of Applied Sciences, Universiti Teknologi MARA, Selangor 40450, Malaysia [2]Department of Wood Industries, Faculty of Applied Seiences, Universiti Teknologi MARA, Pahang 26400, Malaysia [3]Products Development Division, Forest Research Institute Malaysia (FRIM), Selangor 52109, Malaysia

出　　处：《Journal of Chemistry and Chemical Engineering》2012年第11期997-1002,共6页化学与化工（英文版）

摘　　要：This study was undertaken to determine the bending strength properties of off-cut Yellow Meranti wood by applying the finger jointed techniques. The finger orientations that were used in this study are vertical and horizontal finger orientation. Specimens were bonded with PVAc （polyvinyl acetate）. The bending strength properties were determined by the three point and four point bending test method. The results show that vertical finger orientation has the higher mean of modulus of rupture and the modulus of elasticity value of 24.49 MPa （28.91 MPa） and 8,814 MPa （11,668 MPa） respectively. However, the tested specimen properties did not meet the minimum strength of the solid （control） specimens.

关 键 词：Off-cut Yellow Meranti finger joint finger orientation PVAC 

分 类 号：TS652[轻工技术与工程] U414.75[交通运输工程—道路与铁道工程]