类金刚石薄膜挺柱的制备与性能  

Fabrication and properties of tappet with diamond-like carbon film

作　　者：武彬[1] 李骏[1,2] 张俊彦[3] 张斌[3] 

机构地区：[1]吉林大学汽车仿真与控制国家重点实验室,长春130022 [2]中国第一汽车股份有限公司技术中心,长春130011 [3]中国科学院固体润滑国家重点实验室,兰州730000

出　　处：《吉林大学学报（工学版）》2013年第1期51-55,共5页Journal of Jilin University:Engineering and Technology Edition

基　　金：'863'国家高技术研究发展计划项目(2006AA11A108)

摘　　要：采用磁控溅射的方法,利用氩气和甲烷为气源,在中国第一汽车股份有限公司自主研发的发动机配气机构的挺柱上制备类金刚石(DLC)薄膜。利用摩擦磨损试验机和发动机配气机构试验台架,研究了DLC涂层挺柱的摩擦学行为及其对发动机节能的影响。试验结果表明,在边界润滑条件下,DLC涂层挺柱的摩擦因数比原零件降低67%,抗磨损性能大幅度提高;在实际使用工况下,配气机构的摩擦损失降低6%。DLC涂层零件可以降低发动机摩擦损失,适用于汽车低碳技术路线。The diamond-like carbon （DLC） film was deposited on the valve train tappet of a FAW（First Automobile Works） production engine by dc magnetron sputtering which using methane and argon as the precursors. The influence of the tribological properties of the DLC valve train tappet on engine fuel economy was studied by the test in the universal material tester and the electrically driven valve train test rig. The test results show that friction factor of the DLC valve train was reduced by 67% and the ability of wear resistance was enhanced. Mechanical friction loss of engine valve train was decreased by 6 %. DLC coating of engine component makes engines more efficient, so this technology is suitable for the low carbon technical route.

关 键 词：动力机械工程 发动机 类金刚石薄膜 配气机构 摩擦性能 

分 类 号：TK405[动力工程及工程热物理—动力机械及工程]