基于ASM3模型的一体式MBR出水水质模拟分析  

Simulation and analysis of outlet water of submerged MBR based on ASM3

作　　者：张新慧[1,2] 陈兆波[2] 吴德东[1] 

机构地区：[1]东北林业大学林学院,哈尔滨150040 [2]哈尔滨工程大学材料科学与化学工程学院,哈尔滨150001

出　　处：《哈尔滨商业大学学报（自然科学版）》2013年第1期57-62,共6页Journal of Harbin University of Commerce：Natural Sciences Edition

基　　金：国家973重大基础研究项目(2007B512608)

摘　　要：将活性污泥3号模型(ASM3)与一体式MBR结合,采用Matlab/Simulink自行开发了可视化的仿真模拟程序,构建了活性污泥系统模型.将此程序应用于一体式MBR工艺,对其进行了稳态模拟、灵敏度分析和参数校正,并取得了与实测值较为一致的结果.同时利用模型分析了不同进水水质下反应器的出水水质结果,模拟结果与实际状况吻合较好.Combined the activated sludge model No. 3 （ASM3） with the submerged MBR, an activated sludge system was constructed based on the self-developed simulation program of Matlab/Simulink. By applying this program to the performance of the submerged MBR, the simulation results were consistent with the measured values in the steady state simulation sen- sitivity analysis and parameter correction. In addition, using the model to analyze the efflu- ent quality of the reactor under the different condition of the inflow water quality, the simula- tion results were also fairly coincided with the measurements.

关 键 词：ASM3模型 一体式MBR MATLAB SIMULINK 

分 类 号：X703[环境科学与工程—环境工程]