纳米TiO_2含量对共混复合酚醛树脂基半金属材料摩擦性能的影响  

Influence of the Content of Nano-TiO_2 on Friction Properties of Blending Composite Phenolic Resin Base Semi-metallic Friction Materials

作　　者：聂华伟[1] 周元康[1] 曹阳[1] 

机构地区：[1]贵州大学机械工程学院,贵州贵阳550003

出　　处：《润滑与密封》2013年第3期48-52,共5页Lubrication Engineering

基　　金：贵州大学研究生创新基金项目(校研理工2012042);贵州大学自然科学青年科研基金项目(贵大自青基合字(2010)053号)

摘　　要：采用表面修饰的纳米TiO2粒子对酚醛树脂(PF)进行复合填充改性,制备共混复合PF,对固相纳米TiO2粒子在PF中的分散性进行TEM表征,采用热分析仪对复合PF进行热失重分析。以复合改性后的PF为树脂基体制备摩擦材料试样,在XD-MSM定速式摩擦磨损试验机上进行摩擦磨损对比试验。结果表明,纳米TiO2质量分数在1%～3%范围内复合改性的树脂的残炭率呈线性增加,在600℃时,质量分数为3%复合树脂残炭率较无纳米复合树脂提高7%;纳米TiO2质量分数为3%的复合树脂制备的摩擦试样综合性能最佳,高温磨损率明显下降,在350℃时,磨损率比无纳米TiO2复合树脂的摩擦试样降低10%。The blending composite phenolic resin （PF） was prepared by filling different content of surface modified TiO2 nano-particles. The dispersion of the modified solid-phase nano-particles in PF was characterized by TEM, and the thermal weight loss （ TG ） of the synthetic resin was analyzed by thermal analyzer. The friction material samples were pre- pared with the different blending composite PF as resin matrix, and the friction-wear contrast tests were carried on XD- MSM fixed speed type friction-wear testing machine. The results show that the heat resistance of blending composite PF can be improved linearly when the mass fraction of TiO2 nano-particles in the range of 1% -3% , the carbon residue rate of the blending composite PF with 3% TiO2 nano-partieles is increased by 7% at 600 ℃ , compared with the PF without nano-particles. The friction material samples prepared by the blending composite PF with 3 % TiO2 nano-particles have the best comprehensive properties. The wear rate is clearly decreased by 10% at high temperature of 350 ℃.

关 键 词：酚醛树脂 耐热性 磨损率 摩擦材料 

分 类 号：TH117.1[机械工程—机械设计及理论]