喷墨打印水转印过渡层的性能研究  

Performance Research on Transition Layer of Ink-jet Printing in Water Transfer Printing

作　　者：郝喜海[1,2] 付翠霞[1] 王会芬[1] 卞喻[1] 阳家菊[1] 

机构地区：[1]湖南工业大学包装新材料与技术重点实验室,株洲412007 [2]湖南工业大学包装与材料工程学院,株洲412007

出　　处：《包装工程》2013年第5期103-106,共4页Packaging Engineering

摘　　要：实验研究了过渡层对喷墨打印水转印转印膜伸长率及转印效果的影响。结果表明:水转印膜伸长率随着硝化纤维的增加、丙烯酸树脂的减少而减小;初始接触角随表面活性剂纳米二氧化硅的增加而减小,提高了过渡层对水性油墨的吸附性能。Influence of the transition layer on elongation of water transfer printing film and transferring effect was investigated. The results showed that increasing the concentrations of nitrocellulose and decreasing the concentrations of acrylic resin can reduce the elongation; the initial contact angle is reduced by increasing nano silica in surfactant, which improve the adsorption performance of the transition layer of water-based ink.

关 键 词：硝化纤维 伸长率 丙烯酸树脂 纳米二氧化硅 接触角 

分 类 号：TS807[轻工技术与工程]