液压破碎锤系统的联合仿真  

The Co-simulation of Hydraulic Breaking Hammer System

作　　者：杨国平[1] 王聪[1] 王亮[1] 

机构地区：[1]上海工程技术大学汽车工程学院,上海201620

出　　处：《机床与液压》2013年第5期136-141,共6页Machine Tool & Hydraulics

基　　金：国家自然科学基金项目(50975169)

摘　　要：以某型号液压破碎锤为研究对象,基于ADMAS和MATLAB两大软件,针对破碎锤系统虚拟样机进行联合仿真,详细介绍了联合仿真的意义和仿真过程中注意事项以及操作方法;同时初步验证将虚拟样机技术应用于破碎锤研究与开发的可行性,为液压破碎锤的产品开发搭建一个良好的平台。Based on ADMAS and MATLAB, the co-simulation of hydraulic breaking hammer system was discussed in detail. The importance, the notices and the operational method of the co-simulation were introduced. The feasibility of the application of virtual prototyping was preliminarily proved and a good platform was built for the research and design of hydraulic breaking hammer system.

关 键 词：ADMAS MATLAB 液压冲击器 联合仿真 虚拟样机技术 

分 类 号：U455.32[建筑科学—桥梁与隧道工程]