20钢渗碳过程中温度场及应力场的数值模拟  

Numerical Simulation of Temperature and Stress Field of 20 Steel during Carburizing

作　　者：李刚[1] 韩文月[1] 任晶鑫[1] 金红梅[1] 

机构地区：[1]辽宁工程技术大学材料科学与工程学院,阜新123000

出　　处：《机械工程材料》2013年第4期83-86,共4页Materials For Mechanical Engineering

基　　金：辽宁工程技术大学应用创新型人才培养立项课题资助项目(YBT103011)

摘　　要：基于渗碳过程的数学模型,取球体的1/4建立几何模型,利用ANSYS有限元分析软件对20钢渗碳过程中温度场和应力场进行数值模拟,得到了渗碳60s后的温度场云图,将温度场模拟求得的节点温度作为体载荷施加到应力分析中,得到了应力场的模拟结果,并对模拟结果进行试验验证。结果表明:渗碳5h后渗层深度的模拟结果为0.13mm,与试验结果(0.11mm)基本一致,证明了温度场模拟结果可靠;渗碳后20钢表面为拉应力,越往里应力不断减小,心部为稳定的应力状态;渗碳5h后,表面应力达到3.5×108 Pa。Based on mathenmtical model o[ earl）urizing, taking 1 1 section of sphere to build 14eomelrie modt＇J, the carlmrizing teml）eralure and stress fieht of 20 steel were simulated by finite element analysis softw,tre ANSYS. Contour maps of temperature the field of the steel after carburizing for 60 s were obtained, and then stress field simulation resuhs were got by taking tile node temperature from temperature field simulation as a body to apply to struetural stress analysis, and the simulation resuhs were verified hy experiment. The resuhs show that simulated earburizcd depth after carl）urizing for 5 h was 0. 13 ram, which was closed to experimental resuh of t）. 11 ram. and thus tile temperature field simulatioll resuhs were proved to he reliable. The surface of 20 steel was in tensile stress sDtIe, the stress, continuously decreased further into the core. and the core was in stable stress state. After e,irhurizing for 5 h, the surfaee stress reached 3.5 a 10^8 Pa.

关 键 词：渗碳 ANSYS软件 温度场 应力场 

分 类 号：TG156.8[金属学及工艺—热处理]