检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西安建筑科技大学结构工程与抗震教育部重点试验室,陕西西安710055
出 处:《山东大学学报(工学版)》2013年第2期62-69,共8页Journal of Shandong University(Engineering Science)
基 金:陕西省教育厅专项科技计划资助项目(12JK0899);陕西省重点学科建设专项基金资助项目(E01004);陕西省文物局科技资助项目(2011-K-008)
摘 要:为获取中国木结构古建筑保护和修缮中的技术参考依据,以西安城墙永宁门箭楼为研究对象,采用SAP2000有限元软件中摩擦摆隔振单元模拟柱脚平摆浮搁式连接、橡胶隔振单元模拟斗栱层及虚拟弹簧单元模拟榫卯连接,建立了结构空间有限元模型,并进行动力分析。通过3个模型(柱脚刚接、铰接和平摆浮搁连接)的模态对比分析,发现平摆浮搁连接方式能够延长结构的周期,其中前三阶周期变化较明显,分别比柱脚刚接、铰接时延长了约72%和24%;通过反应谱和动力时程分析,得到各个层面的动力放大系数,结果表明,木结构古建筑的隔震性能主要体现在柱脚、梁柱榫卯连接和铺作层部位;耗能分析结果表明,输入的地震能量大部分被结构自身的振型阻尼(平均74.32%)和结构的连接(11.89%)所消耗。To gain the technical basis for the protection and restoration of the ancient Chinese timber structures, the embrasured watchtower of Yongning Gate of Xi'an City Wall was studied and simulated by the Sap 2000 software. The friction isolation element was applied to simulate the float connection between column and plinth, and the rubber isolator element was applied to simulate tou-kung layer. In addition, the finite element model of the embrasured watchtower was established and consequently a dynamic analysis was carried out by applying the spring element to simulate the mortise- tenon connection. Through the modal contrast analysis to the three models (the rigid connection, hinge, float connec- tion between column foot and plinth), the comparative results showed that the float connection mode could lengthen structures natural periods, and the first three periods were more obvious, which were longer about 72% and 24% com- pared to rigid connection and hinge of column foot separately. By the response spectrum and the dynamic response time history analyses to the timber structure model, the dynamic magnification factors of each layer were obtained, which showed that the vibration isolation performance of ancient Chinese timber structure mainly manifested in the column foot, tenon-mortise connection as well as the p' u-tso layer. The structural energy dissipation analysis results showed that the majority seismic energy was consumed by the modal damping ( average 74. 32% ) and the tenon-mortise con- nection (average 11.89% ).
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229