检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:黄嫚[1] 仇玉良[1,2] 王柱[1] 朱仁义[3]
机构地区:[1]中交第一公路勘察设计研究院有限公司,陕西西安710075 [2]北京交通大学土木建筑工程学院,北京100044 [3]长安大学地质工程与测绘学院,陕西西安710054
出 处:《测绘科学技术学报》2013年第2期197-200,共4页Journal of Geomatics Science and Technology
基 金:国家自然科学基金项目(51178052);中国交通建设集团科技研发项目(2007-ZJKJ-A-08)
摘 要:基于GIS思想,探讨了在ArcEngine与Visual Studio2008开发平台下采用混合空间数据模型与GIS模型相结合的方法建立地质体三维模型。经过探索与实践,在ArcEngine组件平台下寻求出一套构建三维地质体的接口与方法。针对往常通过钻孔数据直接构建地质层TIN存在棱角分明与实际地质体不符等缺陷,本文提出由钻孔数据通过克里金插值构建地质栅格层集,再转化成地质TIN层集的间接方法,经试验证明该方法能较好地完成对真实地质层的模拟。本研究对基于GIS平台开发构建地质体三维模型进行了有益的尝试,为地质体的三维模拟以及地下空间数字化系统的建设提供一定参考。GIS-based thinking, the method about establishing geological body 3D modeling with mixed spatial data model and GIS model together under the ArcEngine and Visual Studio2008 development platform was investigated. After exploring and practice, the interfaces and methods used to build 3D geological body in ArcEngine component platform were elaborated. Building the geological layer TIN directly was flawed by drilling data, such as angular and inconsistent with the actual geological. The new way was proposed that built geological grid layers with Krige method using drill data firstly and then converted grid layer to geological TIN layers. This method was proved to complete simulation of real geological layer better. It is a useful attempt building 3D model of the geological body based on the GIS platform and provides a reference for the 3D geological body simulation and the construction of the underground space digital systems.
关 键 词:地质体 地理信息系统 三维建模 ArcEngine平台 不规则三角网
分 类 号:TP183[自动化与计算机技术—控制理论与控制工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.51