芯体流道构型对全热交换器换热效果影响的数值分析  

Numerical Simulation on the Structure of Channel of Total Heat Exchange Equipment Effectiveness

作　　者：钟秋[1] 陶冶[1,2] 杨莉萍[1] 蔡岸[1] 徐子君[1] 雒彩云[1] 张双喜[2] 

机构地区：[1]中国科学院上海硅酸盐研究所,上海200050 [2]青岛理工大学,山东青岛266000

出　　处：《建筑节能》2013年第6期1-4,共4页BUILDING ENERGY EFFICIENCY

基　　金：上海科委长三角科技联合攻关项目:全热交换芯材及高效能量回收设备的研究与开发(10195811600)

摘　　要：芯体是全热交换器的重要组成部分,是全热交换器进行热质交换的关键构件。对平板流道、三角流道翅片不导热、三角流道翅片导热3种情况下,全热交换器的热质交换进行了有限元模拟分析,结果表明:由于二次换热面的存在,三角流道翅片导热时,全热交换器的显热效率以及焓效率明显优于其他两种情况;而当进口风速大于0.8 m/s后,三角流道翅片不导热条件下的焓效率逐渐地略优于平板流道的焓效率,这主要是由于前者的潜热效率随着风速的增加而减少的幅度要小于平板流道造成的。The total heat exchanger core is the key part for the exchange of heat and mass of the total heat exchanger. In the present work, finite element simulations were performed with three different structures of the total heat exchanger channel, including rectangle channel, triangular channel with thermal isolation fin and triangular channel with thermal condnct fin. The results conclude the triangular channel with thermal coudnct fin shows better sensible heat efficiency and the enthalpy efficiency than others because of the thermal conduct of the fin. With the increase of the inlet air speed, the enthalpy efficiency of triangular channel with thermal isolation fin becomes better than the rectangle channel＇s, which mainly because the loss of velocity in the former is bigger than the latter.

关 键 词：流道构型 全热交换器 有限元模拟 热质交换 

分 类 号：TU831[建筑科学—供热、供燃气、通风及空调工程]