适用于宽带通信系统的DHW功放模型  

DHW Power Amplifier Model Applied to Broadband Communication System

作　　者：南敬昌[1] 李厚儒[1] 张智栋[1] 杜学坤[1] 

机构地区：[1]辽宁工程技术大学电子与信息工程学院,辽宁葫芦岛125105

出　　处：《微电子学与计算机》2013年第7期149-153,共5页Microelectronics & Computer

基　　金：国家自然科学基金(60971048);辽宁工程技术大学研究生科研项目(Y201201401)

摘　　要：为有效模拟宽带通信系统中功放的非线性行为,研究了一种双路Hammerstein-Wiener(DHW)功放模型.分别施加相同的激励信号于该模型的Hammerstein分支和Wiener分支,并将两分支输出信号累加作为最终的响应.利用NXP功放管进行Doherty电路设计并加入多载波WCDMA信号驱动,从ADS中导出强非线性输入输出数据进行模型实验测试.结果显示阶数相同条件下,与Hammerstein和Wiener模型相比,此双路Hammerstein-Wiener功放模型能够获得更好的RMSE.另外,该功放模型可在减少整个记忆多项式参数数量30%～40%的前提下,获得与记忆多项式模型近似相同的性能,对功放系统行为模型的研究具有重要的参考价值.In order to simulate the PA nonlinear behavior of a wideband communication system effectively.In this paper,a two-way Hammerstein-Wiener PA model is investigated.Applying the same excitation signal to double branch model with Hammerstein in one branch and Wiener in the other,then regards the addition of two branch models＇output as the final response.Model test is conducted by the strong nonlinear input and output data exported from the DPA circuit which is designed by NXP PA models and driven by multi-carrier wave WCDMA signal in ADS circumstance.As a result,the DHW model can acquire better RMSE compared with the Hammerstein and Wiener model.In addition,the performances of the double Hammerstein-Wiener model is similar to that of the memory polynomial model with a 30%to 40%reduction in the number of parameters,which has great reference value for research of PA behavior model.

关 键 词：宽带通信 功率放大器 HAMMERSTEIN模型 WIENER模型 

分 类 号：TN722.7[电子电信—电路与系统]