半导体电火花线切割加工电流脉冲概率特性及伺服控制研究  

Study on Current Pulse Probability Characteristics and Servo Control in Semiconductor WEDM

作　　者：潘慧君[1] 刘志东[1] 黄赛娟[1] 邱明波[1] 田宗军[1] 

机构地区：[1]南京航空航天大学机电学院,江苏南京210016

出　　处：《电加工与模具》2013年第4期28-31,35,共5页Electromachining & Mould

基　　金：国家自然科学基金资助项目(50975142);江苏省博士后科学基金资助项目(1002009C)

摘　　要：对当前基于金属加工的电火花伺服控制系统在半导体电火花加工中失效的原因进行了分析。由于半导体加工中采样电压不再只是放电通道电压,而是由放电通道电压、半导体体电阻压降和接触势垒压降之和组成,使系统无法准确识别加工状态,导致无法进行准确的伺服进给。对进给速度与电流脉冲概率的关系进行了研究,提出了一种全新的基于电流脉冲概率的半导体电火花加工伺服控制方法,对相关系统参数进行了优化,最终实现了半导体电火花高效、精密、稳定加工。The failure reason of the EDM servo control systems based on metal processing when used in the machining of semiconductor is analyzed. Due to the sampling voltage semiconductor processing is no longer just discharge channels voltage, but the sum of the plasma channel voltage, the voltage drop on semiconductor body resistance and voltage drop of contact barrier, which makes the system unable to identify accurately the processing state, thus resulting in the failure of the servo feed. The relationship between feed speed and the probability of current pulse was studied, and a new semiconductor EDM servo control based on current pulse probability method was put forward. The related system parameters were optimized, and finally the efficiency, precision and stability machining of semi- conductor by WEDM is realized.

关 键 词：半导体 电火花线切割加工 伺服控制 电流脉冲概率 

分 类 号：TG661[金属学及工艺—金属切削加工及机床]