切割硅片用电镀黄铜钢丝行业标准制定  

Industry standard setting of brass electroplating steel wire for silicon chip sawing

作　　者：宋为[1] 薛金祥 朱鹏 刘卫国 胡贻军 庄超 王宝玉[1] 

机构地区：[1]中钢集团郑州金属制品研究院有限公司,河南郑州450001 [2]凡登(常州)新型金属材料技术有限公司,江苏常州213200 [3]宁夏东方钽业股份有限公司,宁夏石嘴山753000 [4]江苏高和机电股份有限公司,江苏盐城224051

出　　处：《金属制品》2013年第4期56-59,63,共5页Metal Products

摘　　要：介绍切割钢丝行业标准制定的任务来源及编制过程,并说明编制内容。确定术语定义、钢丝标记方法,钢丝系列及其外形尺寸偏差;把钢丝破断拉力确定为主要力学性能,把公称抗拉强度定义为仅作参考的名义值。强调线轴钢丝由1根组成,不允许有焊接头存在,同时规定钢丝无排线不良缺陷及不应有漏镀或明显色差存在;钢丝表面应光滑、无竹节或折弯,钢丝长度不允许有负偏差;对试验方法、钢丝的检验项目、取样数量及检验方法进行定性定量要求,同时对其包装、标志、运输、贮存条件等进行规范。To introduce the mission source and compiling work course of sawing wire industry standard setting, explain compiling contents of items. The term definition, steel wire marking method, steel wire series and its size deviation are con firmed. Steel wire breaking force was intended to be main mechanical property, while normal tensile strength was defined normal value as reference. To emphasize the wire on the reel was one steel wire without plumb joint, and no bad winding displacement, no leaking plating, no obvious color deference ; steel wire surface should be smooth, no bamboo joint or ben ding, the length of steel wire not allow minus deviation. The test method, examining items, sampling number and exami ning method were qualitatively and quantitatively required. The package, marking, transportation and storage condition are standardized.

关 键 词：切割钢丝 电镀黄铜 行业标准 硅片 翘距 破断拉力 线轴 

分 类 号：TG356.45[金属学及工艺—金属压力加工]