柳枝模压板材工艺的研究  

Study on Technology of the Willow Branches Press-moulding Board

作　　者：毕克新[1] 王齐[1] 周志芳[1] 王厚军[1] 高大宏[1] 

机构地区：[1]黑龙江省木材科学研究所省木材综合利用重点实验室,哈尔滨150081

出　　处：《林业科技》2013年第5期18-21,共4页Forestry Science & Technology

摘　　要：以柳枝为原料制备模压板材,采用正交试验法研究固化温度、固化时间、预压压力、浸胶量等因素对柳枝模压板材物理力学性能的影响,结果表明,最佳工艺参数为:固化温度130℃,固化时间3 min/mm,预压压力15 MPa,浸胶量9%。The willow braches were processed into board by press-moulding technology. Orthogonal experimental method was used to study the influence relationship between experimental factors and physical-mechanical properties of press-moulding board. These factors were cure temperature, curing time, pre-pressure value and adhesion impregnation amount. Then the optimum technology parameters were specified. The results showed that the optipnum technology parameters were cure temperature 130℃ ; curing time 3min/mm; pre-pressure 15 Mpa; adhesion impregnation amount 9%.

关 键 词：柳枝 模压工艺 物理力学性能 

分 类 号：TS653.5[轻工技术与工程]