盲分离在缺陷信号处理中的应用  

The application of blind source separation on flaw signal processing

作　　者：查君君[1] 何辅云[2] 周鹏[1] 徐善红[3] 

机构地区：[1]安徽工程大学电气工程学院,安徽芜湖241000 [2]合肥工业大学计算机与信息学院,安徽合肥230009 [3]奇瑞汽车股份有限公司,安徽芜湖241000

出　　处：《安徽工程大学学报》2013年第3期37-39,共3页Journal of Anhui Polytechnic University

基　　金：安徽工程大学青年基金资助项目(2007YQ034);(2007YQ035)

摘　　要：针对钢管二维漏磁检测系统中,轴向缺陷检测装置中探头采集到各路轴向缺陷信号之间的互扰问题,采用基于相对梯度算法的盲分离技术,消除探头中各通道传感器采集信号之间的互扰.仿真结果表明,该方法具有稳定的可靠性和有效性,可以有效消除信号间互扰,提高检测设备探测缺陷能力,具有一定的应用前景.In two-dimensional leakage magnetic testing system, disturbance amony flaw signals from lon- gitudinal sensor array is inevitable. The method of relative gradient algorithm contained in blind source separation was employed to reduce the disturbance between flaw signals. The experiment results show that this method is steady in reliability and validity and improves the performance of the detected equipment. Thus blind source separation has great potential in flaw signals process.

关 键 词：盲分离 相对梯度算法 漏磁检测 缺陷信号 信号互扰 

分 类 号：TG115.28[金属学及工艺—物理冶金]