船闸闸门底枢的结构仿真  

Structure simulation for the end of the lock strobe

作　　者：殷勇华[1] 王孟[1] 谢保春 

机构地区：[1]河海大学机电工程学院,江苏常州213022

出　　处：《电子测试》2013年第12期1-4,共4页Electronic Test

摘　　要：闸门是水工建筑物中的重要组成部分，是活动的挡水装置，用以调节流量、控制水位、保证工程效益的发挥。闸门形式的选定，将直接关系到水工建筑物的结构形式。闸门底枢是人字闸门、三角闸门中重要的支承运转部件，起到支撑闸门构件的作用，以及作为叶门旋转中心轴。底枢是人字闸门中最容易发生故障的部件，因而需对其进行详细的分析设计和结构仿真。As an important part of the hydraulic structures, strobe is a retaining water activities of devices to adjust flow, control water level and ensure project efficiency. The selection of strobe forms will directly have influence on structural types of hydraulic structures. The end of the sluice strobe is the bearing and moving parts of the herringbone strobe, triangular strobe, and serves to support the strobe member, as well as acts as the rotation center axis of the leaf gate. The end of the sluice strobe is the most prone to failure of the herringbone strobe parts. So it requires a detailed analysis of the design and simulation of the component structures.

关 键 词：船闸闸门 闸门底枢 结构仿真 

分 类 号：U641[交通运输工程—船舶及航道工程]