导流散热型LED灯的热分析与试验研究  

Thermal analysis and test for convection-cooled LED lamp

作　　者：王祥[1,2] 吴清文[1] 杨献伟[1] 高建国 黄勇[1] 徐振邦[1] 

机构地区：[1]中国科学院长春光学精密机械与物理研究所,吉林长春130033 [2]中国科学院大学,北京100039 [3]都江堰光明光电材料有限责任公司,四川成都610000

出　　处：《应用光学》2014年第1期128-133,共6页Journal of Applied Optics

基　　金：2012长春光学精密机械与物理研究所创新基金(Y2CX1SS125)

摘　　要：对某LED灯开展了空气导流技术的散热设计,进行了有、无空气导流散热条件下的仿真分析,针对热分析模型进行反复修正迭代,得到了准确的仿真结果。仿真分析与试验结果表明,在有空气导流散热的情况下,LED灯的结温较无空气导流散热时降低约8℃,LED灯的使用寿命可延长2 000h。进一步研究发现,基板下表面的发射率、接触热阻以及LED与对流孔之间的距离等因素对LED灯的散热均有影响,最终对各个影响因素进行灵敏度分析,给出了降低结温的几点建议。Thermal design of air convection for an LED lamp was carried out. The simulations for the lamp with or without air convection were studied. In order to ensure the accuracy of simulation result, the thermal analysis model was modified repeatedly. The simulation and test results show that the junction temperature of the LED lamp reduces by about 8℃ with air di version cooling, the lifetime of the LED lamp can extend by 2 000 hours. Further study shows that many factors affect the heat radiation apparently, such as the emissivity of base plate sub surface, the thermal contact resistance, and the distance between convection hole and LED. Sensitivity analysis for each factor was carried out, and some advices on how to further reduce the junction temperature of the LED lamp were put forward.

关 键 词：发光学 空气导流 计算机仿真 LED灯 散热 

分 类 号：TN202[电子电信—物理电子学]