硅钨酸催化合成防腐剂尼泊金辛酯的工艺及防腐性能研究  

Study on the Process and Corrosion Performance of Silicotungstic Acid Catalytic Synthesis of Ppreservative Nipagin Ester

作　　者：姚晓青[1] 唐永[2] 巩育军[1] 

机构地区：[1]广东石油化工学院化学与生命科学学院,广东茂名525000 [2]广东石油化工学院实验教学部,广东茂名525000

出　　处：《广东化工》2014年第3期22-23,25,共3页Guangdong Chemical Industry

摘　　要：文章以对羟基苯甲酸和辛醇为原料,以硅钨酸为催化剂,合成尼泊金辛酯。最佳反应条件为:催化剂用量为6%(相对于酸用量),醇酸比为3∶1,反应温度为120℃,反应时间为4 h。通过正交试验进一步优化,经方差分析,发现反应物料配比对转化率影响最大,优化后的条件合成得到尼泊金辛酯的转化率达90.62%。In the paper, p-hydroxybenzoic acid and octanol as raw materials, using silicotungstic acid as catalyst, synthesis of Nipagin ester. The optimum reaction conditions were as follows： amount of catalyst is 6 % （relative to the amount of acid）, molar ratio of 3 ： 1, reaction temperature 120 ℃, reaction time is 4 h. Further optimized through orthogonal test, variance analysis, found that reactant proportion the biggest impact on conversion rates, conditions for the synthesis of Nipagin ester optimized conversion rate of 90.62 %.

关 键 词：尼泊金辛酯 防腐剂 硅钨酸 

分 类 号：TQ225.241[化学工程—有机化工]