全复材机翼桁条的结构布局和尺寸对刚度的影响分析  

The influence analysis of stiffness on stringer layout and dimension of full composite wing

作　　者：谯盛军[1] 高行山[1] 王富生[1] 

机构地区：[1]西北工业大学工程力学系先进材料测试中心,西安710129

出　　处：《强度与环境》2014年第1期50-56,共7页Structure & Environment Engineering

基　　金：科技部863项目(2009AA04Z418);高等学校学科创新引智计划项目(B07050)

摘　　要：利用薄壁结构力学剖面计算的理论，通过计算获得全复合材料机翼的扭转和弯曲刚度及刚心位置，并进一步研究了桁条的结构布局对机翼整体结构刚度的影响。结果表明：机翼的剖面刚度随桁条的尺寸和分布的变化而改变，桁条最佳间距为130-150mm。该内容的研究为复合材料飞机机翼结构设计和气动弹性分析提供了重要依据。The present study aimed at obtaining retorting stiffness, bending stiffness and stiffness center position of full composite wing using thin wall structure mechanics theory. The influence of stringer layout on wing integer structure stiffness was furthermore investigated. It is found that wing section stiffness was influenced by stringer layout and dimension. The best spacing of stringer was within the range from 130 to 150 ram. The study of this paper provided important support for structural design and aeroelastic analysis on composite wing.

关 键 词：复合材料 刚度 桁条 结构布局和尺寸 

分 类 号：V214.4[航空宇航科学与技术—航空宇航推进理论与工程]