单滴燃料热壁蒸发、微爆与着火的实验研究  

AN EXPERIMENTAL STUDY OF EVAPORATION,MICROEXPLOSION AND IGNITION OF DROPLETS ON HOT SURFACE

作　　者：王利坡[1] 傅维标[1] 

机构地区：[1]清华大学工程力学系,北京100084

出　　处：《工程热物理学报》2001年第1期115-118,共4页Journal of Engineering Thermophysics

摘　　要：多组分燃料在热板的蒸发与着火规律与空间相比，具有一些新的特点，特别是乳化油的贴壁燃烧现象更有重要意义。本文通过实验将多组分与单组分的燃烧情况进行了对比研究。结果表明：（１）易挥发组分的着火延迟在较低的温度条件下长于不易挥发份，在较高温度时情况相反。混合物则居于其中；（２）对于含水的乳化油，燃烧与微爆发生先后同的外界条件有关，其着火过程极为迅速。（３）乳化油中易挥发燃料含量较高，环境温度也较高时，微爆滞后很明显。Compared with the vaporization and combustion of single droplet in space, there are some new characters when a droplet contacts with a hot surface, especially for the case of emulsified oil. An experimental study of the vaporization and ignition of droplet on hot surface has been conducted in the present paper. Through the comparison between the Characters of multiple component and single component droplet, many valuable conclusions can be drown as follows. (1) For the more volatile component as heptane, the ignition delay is much longer than that of less volatile component as hexadecane when surface temperature is lower, while the case is contrary when surface temperature is higher. The ignition delay of blend droplet stands in the middle; (2) For emulsified oil, the occurrence priority of ignition and micro-explosion is related with the surface temperature. The combustion process is very rapid. (3) When the content of volatile additive in emulsified oil is more and surface temperature is higher, the micro-explosion lag will be more visible.

关 键 词：热板着火 微爆滞后 单滴燃料 热壁蒸发 内燃机 

分 类 号：TK407.9[动力工程及工程热物理—动力机械及工程]