悬挂式常温烟雾机气流场与雾滴沉积三维模拟与试验  

3-D Simulation for Airflow Field and Droplets Deposition of Hanging Cold Sprayer

作　　者：李慧[1] 祁力钧[1] 王沛[2] 

机构地区：[1]中国农业大学工学院,北京100083 [2]霍恩海姆大学杂草科学系,斯图加特70599

出　　处：《农业机械学报》2014年第4期103-109,122,共8页Transactions of the Chinese Society for Agricultural Machinery

基　　金：农业部行业科技专项基金资助项目(201203025)

摘　　要：基于CFD三维模拟技术,建立了常温烟雾机在密闭温室内作业的气流速度场模型及雾滴沉积分布模型,分析了常温烟雾机的气流速度场及雾滴沉积分布特性,并进行试验验证。模拟结果表明,常温烟雾机有效风送距离与风送速度呈正比,在喷雾高度为1.5 m时常温烟雾机风送距离最短;风送速度为5 m/s和25 m/s时雾滴质量流率较大,风送速度为20 m/s以上、喷雾高度在2.0 m以上时,雾滴沉积均匀性较好。模拟与试验结果对比说明,在风机作用区域内,所建立气流速度场数值模型模拟相对误差为10%~35%,雾滴沉积分布模型模拟相对误差为15%~35%,可较准确预测常温烟雾机气流速度场与雾滴沉积分布。In order to understand the airflow speed field and deposition distribution rules and characters of a designed hanging cold sprayer,several numerical spraying models for that based on CFD technology were established.Beside that,the verification experiments were conducted.The simulation results indicate that the effective blowing distance is positively related to the blowing speed of the cold sprayer.The cold sprayer gets the minimum blowing distance at the height of 1.5 m.The model gets larger ground mass-flow rate under the blowing speed of 5 m/s and 25 m/s.The model gets better uniformity under blowing speed greater than 20m/s and height greater than 2.0 m.The consequences of simulation and verification experiments show that,in the cold sprayer＇s blowing area,the relative deviation of modeling air flow field is between 10% - 35%,and the relative deviation of droplets＇ deposition model is between 15% - 35%.As the consequence,both of the models can forecast the cold sprayer＇s air flow field and the droplets＇ deposition distribution correctly.

关 键 词：常温烟雾机 计算流体力学 气流速度场 沉积分布 

分 类 号：S493.1[农业科学—植物保护]