钢管高强混凝土压弯构件滞回性能的研究  

Research on hysteretic behavior of high strength concrete filled steel tubular member under compression and bending

作　　者：王湛[1] 甄永辉 

机构地区：[1]汕头大学建工系,汕头515063 [2]深圳市设计院,广东省518000

出　　处：《地震工程与工程振动》2000年第4期51-55,共5页Earthquake Engineering and Engineering Dynamics

基　　金：国家自然科学基金!(59978024);广州省自然科学基金!(990792)

摘　　要：本文根据适用于三向周期受力的钢材本构关系模型，和适用于三向周期受力改进的混凝土本构关系的边界面模型，采用有限元法对钢管高强混凝土压弯构件的荷载－位移滞回曲线进行了理论分析，并进行了６个核心混凝土的强度为７７Ｎ／ｍｍ２的钢管高强混凝土压弯构件滞回性能的试验研究。将理论分析和本试验研究及其他试验研究结果进行了对比，分析了荷载－位移滞回曲线的特点。In this paper, the force-displacement hysteretic loops of high strength concrete filled steel tubular members under compression and bending are calculated using element method with a steel constitutive model which is suitable for multiaxial cyclic loading and for a concrete modified bounding surface model for multiaxial cyclic compression. Six new tests were carried out on steel tubes filled with concrete with a cube strength of 77N/mm2. The theoretical lateral force-displacement hysteretic loops are compared with these tests and tests by other experimentels and the results are discussed.

关 键 词：钢管高强混凝土 滞回性能 有限元 非线性 本构关系 压弯构件 荷载-位移滞回曲线 

分 类 号：TU392.3[建筑科学—结构工程] TU398