基于ARM与μCOS-Ⅱ的试验机控制系统设计与研究  

Design and Research on Control System of Universal Material Testing Machine based on ARM andμCOS-Ⅱ

作　　者：周国平[1] 富会春 

机构地区：[1]上海安科瑞电气股份有限公司,上海201801 [2]上海华龙测试仪器股份有限公司,上海201202

出　　处：《工程与试验》2014年第1期66-69,共4页Engineering and Test

摘　　要：针对目前很多试验机控制系统以MS51系列为CPU、以单速度闭环为控制系统的现状,设计了以CortexM3核CPU为硬件平台、以μCOS-II为操作系统的双闭环模糊PID控制系统。介绍了系统的硬件构成,研究了位置闭环和速度闭环自动切换的双闭环控制,给出了系统的测试结果。结果表明,使用该系统的试验机在加载和保载时都有良好的效果。According to actuality that the control system of most universal testing machine is still using MS5 1 series single-chip microcomputer as CPU,and the control mode is speed closed-loop, a novel double closed-loop control system with fuzzy PID is designed.The system is based on the hardware platform of Cortex-M3 core CPU and the operating system ofμCOS-II.Firstly,hard-ware configuration of the system is introduced,then the double control mode which switching be-tween the position closed-loop and speed closed-loop automatically is researched.Finally,the test result of the system is presented.The result indicates that the universal testing machine using the system to load and keep has a good effect.

关 键 词：万能试验机 控制器 模糊PID控制 μCOS 

分 类 号：TH87[机械工程—仪器科学与技术]