基于VERICUT7.0五轴双摆头机床建模和仿真的研究  

Study on Modeling and Simulation of the Five-axis Double Swing Machine Tool Based VERICUT7.0

作　　者：王虎奇[1] 张健[1] 唐清春[1] 

机构地区：[1]广西科技大学机械工程学院,广西柳州545006

出　　处：《组合机床与自动化加工技术》2014年第6期12-14,共3页Modular Machine Tool & Automatic Manufacturing Technique

基　　金：广西教育厅资助项目(201203YB128);广西工学院博士基金(院科博11Z11)

摘　　要：文章通过对XH2420/5X五轴双摆头机床各部件的实际尺寸进行测量,据测量结果采用UG8.0对各部件进行建模,将建好的三维模型导入VERICUT7.0内并结合机床的运动关系构建仿真机床,在此基础上对分流式叶轮进行模拟仿真加工,最后通过对分流式叶轮的实际加工验证了模拟仿真的正确性和实用性,同时也为其它结构机床的模拟仿真提供了一定经验。The actual size of each component is measured through the five-axis double swing machine tool XH2420/5X, According to the measurement results for each component using UG8.0 modeling, the threedimensional model of building well will be introduced into VERICUT7.0 and combined the simulation machine tool of building with the kinematics of the machine tool , then based on the machining simulation for the Split impeller, and finally through the split impeller actual machining verified the accuracy and usefulness of simulation, but also offered some experience for other structures of the machine tool simulation.

关 键 词：双摆头 仿真 建模 VERICUT7.0 

分 类 号：TH122[机械工程—机械设计及理论] TG65[金属学及工艺—金属切削加工及机床]