基于Solidedge7.0的定位夹紧符号库的二次开发  

The Development of Location Clamping Symbols Library Based on Solidedge7.0 Platform

作　　者：谭伟[1] 张根保[2] 陈猛[2] 

机构地区：[1]渝州大学机械系,重庆400033 [2]重庆大学机械学院,重庆400044

出　　处：《渝州大学学报》2001年第2期62-65,共4页

摘　　要：采用三维CAD软件Solidedge7.0生成的二维工程图不能直接作为CAPP中的工序简图 ,其原因在于Solidedge7.0软件本身并没有提供国标化的定位夹紧符号库。介绍了在国家 86 3/CIMS工程CF—CAPP开发过程中 ,在Solidedge7.0平台上实现了定位夹紧符号库的二次开发。The two_dimension engineering draft produced by using the three_dimension CAD software Solidedge 7.0 can't be directly used as processing diagram in CAPP,because Solidedge 7.0 itself doesn't provide the internationally standardiged “location clamping symbol library.”A method of implementing the development of “location clamping symbol library” based on Solidedge 7.0 platform during the processing of OF_CAPP in National 863/CIMS Project is introduced.

关 键 词：Solidedge7.0 定位夹紧符号库 CAPP CAD 二次开发 工序简图 三维造型设计软件 

分 类 号：TP391.72[自动化与计算机技术—计算机应用技术]