HCI模式对超细卷烟常规烟气成分测试结果的影响  

Influences of HCI Regime on Determination Results of Routine Smoke Components of Super Slim Cigarettes

作　　者：甘学文[1] 胡启秀[2] 蒋锦锋[2] 成涛[1] 赵继俊[2] 李庆华[3] 汪华[4] 郝红玲 林艳 张翼 刘锋 韩冰[9] 廖晓详 向兰康[2] 冯茜[2] 

机构地区：[1]江苏中烟工业有限责任公司,南京市210019 [2]中国烟草总公司郑州烟草研究院,郑州450001 [3]红云红河烟草(集团)有限责任公司,昆明市650202 [4]安徽中烟工业有限责任公司,合肥市230088 [5]河北中烟工业有限责任公司,石家庄市050051 [6]福建中烟工业有限责任公司,福建省厦门市361022 [7]江西中烟工业有限责任公司,南昌市330096 [8]湖南中烟工业有限责任公司,长沙市410000 [9]广东中烟工业有限责任公司,广州市510385 [10]红塔烟草(集团)有限责任公司,云南省玉溪市653100

出　　处：《烟草科技》2014年第7期40-44,共5页Tobacco Science & Technology

基　　金：国家烟草专卖局标准项目“深度抽吸模式下超细卷烟主流烟气中焦油量、烟碱、一氧化碳的测定”(2012B016)

摘　　要：为了研究加拿大卫生部深度抽吸(HCI)模式对超细卷烟主流烟气中焦油、烟碱和一氧化碳(CO)测试结果的影响,9家实验室利用7台转盘型和5台直线型吸烟机在ISO模式和HCI模式下对4种超细卷烟开展了共同实验研究。结果表明:1HCI模式对主流烟气中焦油、烟碱和CO释放量测试值的影响基本一致;2HCI模式下,焦油、烟碱和CO释放量测试值增加幅度随ISO焦油量降低和/或滤嘴通风率的增大而增加;3HCI模式下焦油和烟碱测定结果的重复性限和再现性限、CO测试结果的重复性限及焦油测试结果的相对再现性限均大于ISO模式,表明HCI模式下焦油、烟碱和CO测试结果的精密度比ISO模式差。In order to study the influences of Health Canada Intense （HCI） regime on the deliveries of tar, nicotine and carbon monoxide （CO） in mainstream smoke of super slim cigarettes, a collaborative study involving 7 rotary smoking machines and 5 linear smoking machines in 9 laboratories was carried out by smoking 4 super slim cigarette brands under ISO and HCI regimes respectively. The results showed that： 1） The influences of HCI regime on the deliveries of tar, nicotine and CO were basically the same. 2） Under HCI regime, the deliveries of tar, nicotine and CO increased with the decrease of tar delivery determined under ISO regime and/or with the increase of ventilation rate of cigarette filter. 3） Comparing with ISO regime, the repeatability （r） and reproducibility （R） of tar and nicotine determination results, the repeatability （r） of CO determination results and the relative reproducibility （R/m） of tar determination results under HCI regime were higher, which indicated that the precision of HCI regime for tar, nicotine and CO determination results was lower than that of ISO regime.

关 键 词：HCI模式 超细卷烟 焦油 烟碱 CO 释放量 精密度 重复性限(r) 再现性限(R) 

分 类 号：TS411.2[农业科学—烟草工业]