双孢菇工厂化生产中培养料托盘收布装置  

Design and experiments of compost pallet transfer device in Agaricus bisporus factory cultivation

作　　者：杨杰[1] 赵武云[1] 戴飞[1] 费强[1] 胡小兵[1] 

机构地区：[1]甘肃农业大学工学院,甘肃兰州730070

出　　处：《食品与机械》2014年第4期103-106,共4页Food and Machinery

基　　金："十二五"国家科技支撑计划资助项目(编号:2012BAD14B10)

摘　　要：设计一种双孢菇培养料托盘收布装置。应用Solid—works软件进行三维建模，用Adams软件对系统进行运动仿真模拟，得到托盘的位置和空间轨迹仿真曲线，验证了系统的性能。并进行定位误差性能测试试验，试验结果表明：该系统可以顺利完成托盘的转运，满载时其行走速度均值达到23．7m／min，提升速度均值达到9．1m／min，转运速度均值达到8．9m／min，每次转运周期控制在60S内完成，满足工厂化生产中高效生产要求。行走定位误差均值控制在25～30mm范围内，提升定位误差均值控制在40～50mm范围内，转运定位误差均值控制在20～25mm范围内，满足工厂化生产中准确度要求。研究结果可为托盘收布装置的设计和后续优化提供参考。The compost pallet transfer device of Agaricus bisporus was designed. Used Solidworks software for three-dimensional mod- eling software with Adams motion simulation of the system, to get the position of the tray and space trajectory simulation curve, and verified the system performance. A positioning error Performance Test was carried out, and test results showed that the system could successfully complete pallet transport, the walking speed reached 23.7 m/min when loaded with its average, with the mean lifting speed 9.1 m/min, mean transit speed 8.9 m/min, and each trans-port cycle control in the 60 s, met the requirements of industrial pro-duction of efficient production. Walking positioning error mean was controlled in the range of 25-30 mm, the positioning error of the mean 40-50 ram, and the positioning error of the mean transit 20- 25 mm, met the accuracy requirements of industrial production. Follow-up studies can be designed and optimized for the compost pallet transfer device of agaricus bisporus.

关 键 词：双孢菇 工厂化生产 培养料 托盘 收布装置 

分 类 号：S646[农业科学—蔬菜学]