不同配方比对亚麻屑复合材料力学性能的影响  

Effect of Different Formulations on the Mechanical Properties of Flax Shive

作　　者：王巍[1] 衣明[1] 周忠峰 郑万友[1] 

机构地区：[1]黑龙江林业职业技术学院,黑龙江牡丹江157011

出　　处：《林业机械与木工设备》2014年第8期30-31,34,共3页Forestry Machinery & Woodworking Equipment

基　　金：黑龙江省教育厅高职高专科学研究项目"亚麻屑/高密度聚乙烯复合材料的制备与性能研究"(12535059)

摘　　要：采用单因素实验方法及两步法工艺,分别制备出亚麻屑比例不同的木塑复合材料,检测其力学性能。结果表明,随着亚麻屑比例的增加,木塑复合材料的力学性能呈现出先升后降的趋势,当亚麻屑的含量为60%时,其力学性能最佳,并根据制备过程确定了最优工艺和实验配方。Using single factor experiment method and two-step process, wood/plastic composite materials with different por-tions of flax shive are prepared, with their mechanical properties tested. The result shows that with the increase in the propor-tion of flax shive, its mechanical properties show an upward and then downward trend, with the best mechanical properties obtained in the case of 60%flax shive. Based on the preparation process, the optimum process and experimental formula are determined.

关 键 词：亚麻屑比例 木塑复合材料 力学性能 

分 类 号：TS621[轻工技术与工程]