基于Battelle热点应力法的轻量化桥式起重机主梁焊缝疲劳分析  

Fatigue analysis for girder weld joint of light-weight bridge crane based on Battelle hot-spot stress method

作　　者：李震[1] 曹旭阳[1] 高顺德[1] 魏兴[1] 汤秀丽[2] 

机构地区：[1]大连理工大学,大连116025 [2]北京起重运输机械设计研究院,北京100007

出　　处：《起重运输机械》2014年第8期65-69,共5页Hoisting and Conveying Machinery

基　　金：国家科技支撑计划"通用型桥式起重机轻量化设计技术及应用"课题资助(2011BAF11B02)

摘　　要：以额定起重量为5 t的轻量化桥式起重机主梁为研究对象,以主梁疲劳试验数据结果为验证依据,预测主梁焊缝的疲劳寿命,建立了包括焊缝的主梁有限元实体模型,按照试验载荷工况对其进行静强度分析,在静强度满足要求的前提下,运用Fe-safe软件中以Battelle热点应力为核心技术开发的Verity模块对主梁焊缝进行疲劳强度分析,分析结果表明,轻量化后的主梁焊缝疲劳强度可满足使用要求,结果可靠,具有较好的可信性。文中采用的分析方法可直接应用于类似结构的焊缝疲劳分析。The girder of light-weight bridge crane with 5t of rated lifting weight is taken as the study object, the data result of fatigue test for the girder as the basis, to estimate the fatigue life of girder weld joint. The finite dement solid model for the girder containing weld joints is built to perform static strength analysis for test load conditions. Under the premise of static strength meeting the related requirements, the fatigue strength analysis is performed for the girder weld joint with Verity module in Fe-safe developed with Battelle hot-spot stress as the core technology. The analysis result shows that fatigue strength of the girder weld after weight reduction can meet the application requirements, with reliable result and good credibility. The analysis method in the paper can be directly applied to the weld fatigue analysis for similar structures.

关 键 词：桥式起重机 轻量化 主梁 Battelle热点应力法 焊接疲劳 

分 类 号：TH215[机械工程—机械制造及自动化]